Sign In | Join Free | My burrillandco.com
Home > Water Pump Mechanical Seal >

Blackmer-55mm Industrial water pump mechanical seal

    Buy cheap Blackmer-55mm Industrial water pump mechanical seal from wholesalers
     
    Buy cheap Blackmer-55mm Industrial water pump mechanical seal from wholesalers
    • Buy cheap Blackmer-55mm Industrial water pump mechanical seal from wholesalers
    • Buy cheap Blackmer-55mm Industrial water pump mechanical seal from wholesalers
    • Buy cheap Blackmer-55mm Industrial water pump mechanical seal from wholesalers

    Blackmer-55mm Industrial water pump mechanical seal

    Ask Lasest Price
    Brand Name : YUE MI
    Model Number : Blackmer-55mm
    Certification : ISO SGS
    Price : US $ 166.8-186.8/PCS
    Payment Terms : L/C, D/A, D/P, T/T, Western Union, MoneyGram
    Supply Ability : 10000/Set/Month
    Delivery Time : 2 word days
    • Product Details
    • Company Profile

    Blackmer-55mm Industrial water pump mechanical seal


    Blackmer-55mm Industrial water pump mechanical seal


    For 35mm 45mm Blackmer Pump Seal 337008 334414 Mechanical Seal
    1.YUEMI BLK is For GX & X3" pumps
    Used in models: GX3E,X3E,XH3E,TXD3E,TX3ETX1230A
    For a GX and X and Pumps Used in models:,XH2.5BTX1.5,TXD2A,TX2A,TXD2.5A,TX2A,TXD2.5A
    TX2.5A,TX1220A,TX1225A


    Technical Parameters


    Temperature-30℃~+200℃
    pressure≤1.2Mp a
    Speed≤12m/s

    Materials


    Rotary RingSIC CAR CE TC
    Stationary Ring

    SIC CAR CE TC

    SpringSUS304/SUS316
    Stationary SeatSUS304/SUS316
    Secondary Seal

    Fkm/EPDM

    Rotary Ring HolderSUS304/SUS316


    Preperation:
    1. Shaft Outside Diameter is within tolerance +-0.05mm
    2. Shaft run out <0.1mm
    3. Shaf end float <0.13mm
    4, No sharp edges on the shaft over the o ring


    Note:
    During the installation,don't scratch or damage the o ring.lf anything is damaged,please contactwith Us to replace a new one.


    Installation in strucstions:
    1. The full set of cartridge seal is cleaned and exactly passed leakage examine before sale.Inorder to avoid damage,don't disassemble and clean the parts again before fixing.


    2 The fitting allowance between the seal and shaft is dl h6 0.8,and there should be leading-inedge at the end of shaft.The outside diameter of shaft at the position of screw should be 01 0.2mm smaller,resisting the screw over-tighten.Lubricate the shaft with oil


    3. Place the cartridge seal into the pump chamber,then:
    A: Tighter four screw bolts of flanges,ensuring the medium leading in hole"G"at the top Position

    B : Tighter four set screws and position the shaft sleeve on the shaft.
    C: Remove four gauge plates.Please keep them and they wil be used in future installation and
    disassemble.
    D: Connect the medium lead_in pipe with hole"G"in order to flush away the friction heat and
    flushing the seal chamber when pump running.


    Note:
    ter complete the installation,turning the shaft by hand to check for the rotationi he shat could not rotate smoothily,seal had been improperly installed.


    We would like lo sincerely ooperale with Clients to supply high qually products and senice We beleve in establishing a long:erm cooperalive relalionshipis lhe key to suceess


    Blackmer-55mm Industrial water pump mechanical seal


    Quality Blackmer-55mm Industrial water pump mechanical seal for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: YUEMI
    *Subject:
    *Message:
    Characters Remaining: (0/3000)