Sign In | Join Free | My burrillandco.com
Home > Wilo Pump Mechanical Seal >

MG12-14/Z Wilo Pump Mechanical Seal Engineering MVI/MHI/MHIL/TYPE

    Buy cheap MG12-14/Z Wilo Pump Mechanical Seal Engineering MVI/MHI/MHIL/TYPE from wholesalers
     
    Buy cheap MG12-14/Z Wilo Pump Mechanical Seal Engineering MVI/MHI/MHIL/TYPE from wholesalers
    • Buy cheap MG12-14/Z Wilo Pump Mechanical Seal Engineering MVI/MHI/MHIL/TYPE from wholesalers
    • Buy cheap MG12-14/Z Wilo Pump Mechanical Seal Engineering MVI/MHI/MHIL/TYPE from wholesalers
    • Buy cheap MG12-14/Z Wilo Pump Mechanical Seal Engineering MVI/MHI/MHIL/TYPE from wholesalers

    MG12-14/Z Wilo Pump Mechanical Seal Engineering MVI/MHI/MHIL/TYPE

    Ask Lasest Price
    Brand Name : YUE MI
    Model Number : MG12-14/Z
    Certification : ISO SGS
    Price : US $ 7.8-12.8/PCS
    Payment Terms : L/C, D/A, D/P, T/T, Western Union, MoneyGram
    Supply Ability : 1000/Set/Month
    Delivery Time : 2 word days
    • Product Details
    • Company Profile

    MG12-14/Z Wilo Pump Mechanical Seal Engineering MVI/MHI/MHIL/TYPE





    Working Conditions

    Mediums: Water, oil and weakly-corrosive mediums

    Temperature: -20℃ to 120℃

    Pressure:≤1.2MPa

    Speed:≤12m/s


    Materials

    Stationary Ring: Ceramic/Sic/TC

    Rotary Ring:Carbon/Sic/TC

    Secondary Seal: NBR/EPDM/Fkm

    Spring and Metal Part: Stainless Steel



    (ww)rSize CodeD3D7L4L1L11L12
    10010022.5021.006.6014.5025.9033.40
    12012025.0023.006.6015.0025.9033.40
    14014028.5025.006.6017.0028.4033.40
    15015028.5027.006.6017.0028.4033.40
    16016028.5027.006.6017.0028.4033.40
    18018032.0033.007.5019.5030.0037.50
    20020037.0035.007.5021.5030.0037.50
    22022037.0037.007.5021.5030.0037.50
    24024042.5039.007.5022.5032.504250
    25025042.5040.007.5023.0032.50

    42.50

    28028049.0043.007.5026.5035.0042.50
    30030049.0045.007.5026.5035.00

    42.50

    32032053.5048.007.50

    27.50

    35.0047.50
    33033053.5048.007.50

    27.50

    35.00

    47.50

    35035057.0050.007.5028.5035.0047.50
    38038059.0056.009.0030.0036.0046.00
    40040062.0058.009.0030.0036.0046.00
    43043065.5061.009.0030.0036.0051.00
    45045068.0063.009.0030.0036.0051.00
    48048070.5066.009.0030.5036.0051.00
    50050074.0070.009.5030.5038.0050.50
    53053078.5073.0011.0033.0036.5059.00
    55055081.0075.0011.00350036.5059.00
    58058085.5078.0011.00

    37.00

    41.5059.00
    60060088.8080.00

    11.00

    38.00

    41.50

    59.00
    65065093.5085.0011.0040.0041.5069.00
    68068096.5090.0011.3040.00

    41.20

    68.70
    70070099.5092.0011.3040.0048.7068.70
    750750107.0097.0011.3040.0048.0068.70
    800800112.00105.0012.0040.0048.0078.00
    850850120.00110.0014.0041.0046.0076.00
    900900127.00115.0014.0045.0051.0076.00
    950950132.00120.0014.0046.0051.0076.00
    1001000137.00125.0014.0047.0051.0076.00

    Preperation:
    1. Shaft Outside Diameter is within tolerance +-0.05mm
    2. Shaft run out <0.1mm
    3. Shaf end float <0.13mm
    4, No sharp edges on the shaft over the o ring


    Note:
    During the installation,don't scratch or damage the o ring.lf anything is damaged,please contactwith Us to replace a new one.


    Installation in strucstions:
    1. The full set of cartridge seal is cleaned and exactly passed leakage examine before sale.Inorder to avoid damage,don't disassemble and clean the parts again before fixing.


    2 The fitting allowance between the seal and shaft is dl h6 0.8,and there should be leading-inedge at the end of shaft.The outside diameter of shaft at the position of screw should be 01 0.2mm smaller,resisting the screw over-tighten.Lubricate the shaft with oil


    3. Place the cartridge seal into the pump chamber,then:
    A: Tighter four screw bolts of flanges,ensuring the medium leading in hole"G"at the top Position

    B : Tighter four set screws and position the shaft sleeve on the shaft.
    C: Remove four gauge plates.Please keep them and they wil be used in future installation and
    disassemble.
    D: Connect the medium lead_in pipe with hole"G"in order to flush away the friction heat and
    flushing the seal chamber when pump running.


    Note:
    ter complete the installation,turning the shaft by hand to check for the rotationi he shat could not rotate smoothily,seal had been improperly installed.


    We would like lo sincerely ooperale with Clients to supply high qually products and senice We beleve in establishing a long:erm cooperalive relalionshipis lhe key to suceess

    MG12-14/Z Wilo Pump Mechanical Seal Engineering MVI/MHI/MHIL/TYPE

    Quality MG12-14/Z Wilo Pump Mechanical Seal Engineering MVI/MHI/MHIL/TYPE for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: YUEMI
    *Subject:
    *Message:
    Characters Remaining: (0/3000)